![background image](http://html2.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_service-manual_3529626015.webp)
F/N 522803 Jul12
© 2012 ICS, Blount Inc.
814PRO SERVICE MANUAL
13
5.2 MOTOR INSPECTION AND
CLEANING
Inspect and clean all parts as follows:
A CLEANING
Clean all parts with a degreasing
solvent. Blow dry with compressed
air and wipe clean. Use only lint-free
cloths.
B GEAR HOUSING
The chamber bores and bottoms
around the shaft bushings should be
polished and not rough or grooved. If
the bushing bores are yellow-bronze,
replace them and investigate the
cause of wear.
The flat surfaces around the chamber
and bolt holes should be flat and free
of nicks or burrs that could cause
misalignment or leaks.
C BUSHINGS
The inside of the bushings should
be gray with some bronze showing
through. If significant yellow-bronze
shows, replace the bushings.
5. MOTOR ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......