![background image](http://html2.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_service-manual_3529626017.webp)
F/N 522803 Jul12
© 2012 ICS, Blount Inc.
814PRO SERVICE MANUAL
15
G SHAFTS
The shaft diameter at the bearing
and seal locations must be smooth.
Grooves, roughness or a reduced
diameter indicate fluid contamination
or damaged bushings. Grit particles
may have been imbedded in the
bushings grinding into the hardened
shaft. If abnormal shaft wear as
above occurs (more than normal
polishing), replace both the shaft and
associated bushings.
Also check the hydraulic system for
excess contamination in the fluid
and for filter condition. Operating
conditions may require changing from
a 25-micron filter to an oversized
10-micron filter.
See power pack manual for
instructions.
5. MOTOR ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......