F/N 522803 Jul12
© 2012 ICS, Blount Inc.
814PRO SERVICE MANUAL
11
I Remove the large face seal o-ring (5)
while being careful not to damage the
o-ring groove or surrounding surface.
J While protecting the motor surface
of the valve handle from damage,
tap lightly on the small diameter end
(gear side) of the motor shaft (50)
to remove it.
K To remove the bearing from the
shaft, press on the outside end
(sprocket end) of the motor shaft
while supporting the outer race of the
bearing. Discard the old bearing.
5. MOTOR ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......