![background image](http://html2.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_service-manual_3529626004.webp)
© 2012 ICS, Blount Inc.
F/N 522803 Jul12
814PRO SERVICE MANUAL
2
Shop Manual Use
This manual contains all the technical information necessary for carrying out repairs on the
814 hydraulic saw. For safe, efficient work, it is of prime importance that the values indicated
be adhered to. Routine periodic maintenance is covered in the operator’s manual included with
each hyraulic saw.
General Shop Rules
• Always use the right tools for the job, otherwise components may be damaged.
• Use a plastic dead blow mallet to separate parts attached solidly to each other.
• Mark mating parts as a reassembly reference.
• Keep component parts together as a group. Assemble screws and nuts into appropriate
subgroups.
• When reassembling, clean all parts carefully, lubricate moving parts and replace all oil seals,
o-rings, gaskets, washers and self-locking nuts.
•
For best results, use only original ICS
®
replacement parts.
SERVICING THE ICS
®
HYDRAULIC SAW: Servicing of hydraulic tools, other than routine
maintenance, must be performed by an authorized and certified dealer. For the nearest
authorized and certified dealer, call ICS
®
at the number listed on the back of this manual and
ask for a Customer Service Representative.
SHOP MANUAL USE
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......