![background image](http://html2.mh-extra.com/html/ics/speedhook-814pro/speedhook-814pro_service-manual_3529626018.webp)
© 2012 ICS, Blount Inc.
F/N 522803 Jul12
814PRO SERVICE MANUAL
16
5.3
MOTOR REASSEMBLY
A Grease and carefully install a new
quad ring (78) into the seal liner (54).
Grease and install a new o-ring (53)
onto the seal liner. Install the seal
liner into the valve handle assembly.
Replace the retaining ring (79).
B To replace the bearing (80) onto the
motor shaft (50), support the bearing
inner race and press the motor shaft
through the bearing inner race.
C Place the valve handle assembly on
a smooth clean arbor press surface
(protected from damage) with the
large bearing bore facing up. Position
the valve handle so a clearance hole
exists for the insertion of the motor
shaft.
5. MOTOR ASSEMBLY
Summary of Contents for SpeedHook 814PRO
Page 1: ...F N 522803 Jul12 2012 ICS Blount Inc 814PRO SERVICE MANUAL...
Page 2: ......
Page 33: ......