![background image](http://html1.mh-extra.com/html/ics/multipanel-2025/multipanel-2025_manual_3540033007.webp)
ENG
Start-up
7
START-UP
Basic settings
When you switch on the measuring instrument for the
first time, you are asked to define the basic settings.
How to define the basic settings
1
Press
[F4]
to switch on the measuring instrument.
2
Use
[F1]
or
[F2]
to select the desired menu lan-
guage.
Save your entry by pressing
[F4]
.
3
Confirm your selection with
[F3]
.
4
Use
[F1]
to select your desired units of measure-
ment.
Save your entry by pressing
[F4]
.
The display shows the firmware version number
and serial number of the measuring instrument.
The display then shows the calibration notice.
5
Use
[F4]
to exit the calibration notice.
The calibration notice is only displayed if no cali-
bration interval is defined.
The measuring instrument is ready.
Summary of Contents for MultiPanel 2025
Page 25: ...ENG Technical data 25 ...
Page 26: ...Technical data 26 Operating Instructions Version 1 0 ...
Page 27: ...ENG Technical data 27 ...
Page 28: ......