Channels
16
MultiPanel 2025
O
perati
ng Instruct
ions
• Version
1.0
Calibration value
The calibration value is a number and is entered as
five characters. The first character can be a minus
sign. Digits or periods (correspond to commas) are
also characters.
Examples for calibration values:
•
Gear wheel volumetric flow sensor
Quantity per spaces between cogs
•
Turbine volumetric flow sensor
Flow rate at 1000 Hz
•
RPM sensor
Number of pulses per revolution (reflective marks)
How to configure a measurement channel
1
Press
[MENU]
to open the
MAIN MENU
.
2
Use
[MENU]
to open the
CHANNELS
menu.
3
Use
[F1]
to select the desired channel.
Use
[MENU]
to open the
CHANNELS
menu.
4
Configure the measurement variables:
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the measure-
ment variable and unit of measurement.
•
Use
[MENU]
to save your entry.
5
Configure the signal type:
•
Press
[F1]
to select
Signal
.
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the signal type.
•
Use
[MENU]
to save your entry.
6
Configure the measurement series or C value:
•
Press
[F1]
to select
Range
.
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the first digit.
•
Press
[F3]
to select the next digit.
•
Repeat the last two steps until you have en-
tered the lower measurement area or the K
value.
•
Press
[MENU]
to save your entry.
7
When you configure the measurement area, you
can enter the upper measurement series.
To do so, repeat Step
6
.
8
Press
[F4]
until the display shows the measure-
ment values again.
Summary of Contents for MultiPanel 2025
Page 25: ...ENG Technical data 25 ...
Page 26: ...Technical data 26 Operating Instructions Version 1 0 ...
Page 27: ...ENG Technical data 27 ...
Page 28: ......