ENG
Measurement
13
Min./max. Display
Pressing
[F1]
switches to min./max. display or back
to the current measurement values.
Pressing
[F2]
deletes the min./max. memory. The dis-
play immediately shows the current min./max. meas-
urement values.
Saving and deleting measurement series
You can save up to five measurement series. You can
assess and save measurement series with the
HYDROlink6 software.
If you have already saved five measurement values in
the measuring instrument, you must delete measure-
ment series before you can save new measurement
series.
How to save a measurement series
1
Press
[F3]
.
2
If necessary, change the
Scanrate
using
[MENU]
.
The value in brackets shows the maximum length
of the measurement series for the selected scan-
rate.
3
Start the measurement series by pressing
[F3]
.
The display shows a progress bar on the right
side.
4
Press
[F2]
to display the current memory status.
The display automatically switches back after
5 seconds. The measurement series automati-
cally end after 60,000 measurement points.
5
Press
[F3]
to manually end the measurement se-
ries.
How to delete a measurement series
1
Press
[MENU]
to open the
MAIN MENU
.
2
Press
[F1]
to select the
Memory
entry and use
[MENU]
to open the
MEMORY
menu.
3
Press
[F1]
or
[F2]
to select a measurement series
of
all: #1 - #5
.
4
Press
[F3]
and confirm with
[F4]
.
The selected measurement series are deleted.
5
Press
[F4]
until the display shows the measure-
ment values again.
A
Maximum values
B
Minimum values
A
B
Summary of Contents for MultiPanel 2025
Page 25: ...ENG Technical data 25 ...
Page 26: ...Technical data 26 Operating Instructions Version 1 0 ...
Page 27: ...ENG Technical data 27 ...
Page 28: ......