ENG
Instrument configuration
21
Units
Use the
Unit
setting to change the unit system of the
measuring instrument. You can choose between the
following unit systems:
•
SI
: International standardised units
•
US
: US American units
The setting of the unit system only has an effect on
the connected ISDS sensors.
The unit system was determined during start-up. You
can change the unit system at any time, however.
How to change the unit system
1
Open the
DEVICE
menu and use
[F1]
to select
the
Unit
entry.
How to open the
DEVICE
menu, page 20
2
Press
[MENU]
.
3
Use
[F1]
or
[F2]
to select the desired unit system.
4
Press
[MENU]
to save your entry.
5
Press
[F4]
to leave the
DEVICE
menu.
Display rate
You can use the
Disp.rate
setting to change the dis-
play rate. The display rate determines at which inter-
vals the measurement values are updated on the dis-
play. You can choose between 1 second and
500 milliseconds.
The shorter the display rate, the more unstable the
measurement values appear in the display.
Do not confuse the display rate with the measurement
rate at the signal input and the scanrate of a measure-
ment series.
How to change the display rate
1
Open the
DEVICE
menu and use
[F1]
to select
the
Disp.rate
entry.
How to open the
DEVICE
menu, page 20
2
Press
[MENU]
.
3
Use
[F1]
or
[F2]
to select the desired display rate.
4
Press
[MENU]
to save your entry.
5
Press
[F4]
to leave the
DEVICE
menu.
Calibration
You can use the
Calibration
setting to open the
CALIBRATION
menu.
For information on the calibration interval, please
read the following section:
A
Displays the set calibration interval.
B
Displays the date of the last calibration.
C
Displays when the measuring instrument displays
a reminder of the next calibration.
A
B
C
Summary of Contents for MultiPanel 2025
Page 25: ...ENG Technical data 25 ...
Page 26: ...Technical data 26 Operating Instructions Version 1 0 ...
Page 27: ...ENG Technical data 27 ...
Page 28: ......