![background image](http://html1.mh-extra.com/html/ics/multipanel-2025/multipanel-2025_manual_3540033019.webp)
ENG
Channels
19
Configuring analog outputs C7 and C8
The operation of the menus for trigger output (
C7
)
and relay output (
C8
) is identical.
How to configure an analog output
1
Press
[MENU]
to open the
MAIN MENU
.
2
Use
[MENU]
to open the
CHANNELS
menu.
3
Use
[F1]
to select the desired channel.
Use
[MENU]
to open the
CHANNELS
menu.
4
Configure the reference channel:
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the reference
channel.
•
Use
[MENU]
to save your entry.
5
Configure the signal type:
•
Press
[F1]
to select
Signal
.
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the signal type.
•
Use
[MENU]
to save your entry.
6
Configure the output range:
•
Press
[F1]
to select
Range
.
•
Press
[MENU]
.
•
Press
[F1]
or
[F2]
to change the first digit.
•
Press
[F3]
to select the next digit.
•
Repeat the last two steps until you have en-
tered the lower output range.
•
Press
[MENU]
to save your entry.
7
Now enter the upper output range.
To do so, repeat Step
6
.
8
Press
[F4]
until the display shows the measure-
ment values again.
Summary of Contents for MultiPanel 2025
Page 25: ...ENG Technical data 25 ...
Page 26: ...Technical data 26 Operating Instructions Version 1 0 ...
Page 27: ...ENG Technical data 27 ...
Page 28: ......