![background image](http://html1.mh-extra.com/html/ics/linker-iia/linker-iia_user-manual_3528704069.webp)
68
FUNCTION: SET COURTESY TONE SPEED
FUNCTION CODE:
133
PURPOSE:
This function is used for changing the courtesy tone speed..
HOW TO USE:
1.
Key up
2.
Enter the SET COURTESY TONE SPEED function code
3.
Unkey
4.
The controller sends ENTER NEXT DATA indication
5.
Enter the desired courtesy tone speed in words per minuite, 5wpm to 30wpm
6.
Unkey
7.
The controller sends the COMMAND ACCEPTED indication
8.
The courtesy tone speed is now the newly entered value.
This feature is available starting with version 1.30 of the Linker II / Linker IIa software.
FUNCTION: ID_CANCEL_ENABLE
FUNCTION CODE:
134
PURPOSE:
This function is used to enable ID canceling
HOW TO USE:
1.
Key up
2.
Enter the ID_CANCEL_ENABLE function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
The is now the newly entered value
The ID cancel will stop the ID anytime an enabled receiver is determined to be active. The controller will
immediately try to ID again when there is not an enabled receiver active. When this is enabled the ID will not
occur when the controller is activating the push to talk. In order for the IDer to stop trying to ID the full ID must
be sent.
This feature is by default disabled.
To keep the current setting of this function you must use the SAVE STATUSES command (command #87). This
will insure the current status of this setting will be maintained upon power up and reset.
This feature is available starting with version 1.30.1 of the Linker II / Linker IIa software.
Summary of Contents for Linker IIa
Page 12: ...11...