26
FUNCTION:
RX 2 AND TX 2 DISABLE
FUNCTION CODE:
49
PURPOSE:
Disables RX 2 and TX 2 and returns the remote base to the home memory
HOW TO USE:
1.
Key up
2.
Enter the RX 2 AND TX 2 DISABLE function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
RX 2 and TX 2 have been disabled and the memory (if it had been changed from memory 0) is incrementing back
to memory 0 (the home memory).
FUNCTION:
RX 2 ENABLE
FUNCTION CODE:
50
PURPOSE:
Enables RX 2
HOW TO USE:
1.
Key up
2.
Enter the RX 2 ENABLE function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
RX 2 receiver will now be enabled.
The remote base memory will not be changed with this function
Summary of Contents for Linker IIa
Page 12: ...11...