Ethernet I/O Modules
4.
In the I/O Pair connection section, select “
Client
” from the “
Server Mode
” drop-down options.
5.
Enter the
IP address for the PETL-7060 module
in the “
Remote Server IP
” field.
6.
Enter the
TCP Port for the PETL-7060 module
in the “
Remote TCP Port
” field.
7.
Enter a
DI Count value for the PETL-7060 module
in the “
Remote DI Count
” field of the “Remote
DI to Local DO section”.
For example, enter
“2”
in the
“Remote DI Count”
field. This means
DI x2 of the PETL-7060 module
is mapped to
DO x2 of tET/tPET module #2
.
8.
Enter the
DI Address
for the PETL-7060 module
in the “
Remote DI Address
” field of the “Remote
DI to Local DO section”.
For example, enter
“2”
in the
“Remote DI Address”
field. This means
DI addresses DI2 and DI3 of
the PETL-7060 module
are mapped to
DO x2 of tET/tPET module #2
.
Refer to
Figure 5-9
for an illustration of how to perform the above procedure.
9.
Click the “
Submit
” button to complete the configuration.
Figure 5-9
4
7
5
6
8
9
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 70
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
