ICP DAS USA tET Series User Manual Download Page 37

Page: 37 / 118

Ethernet I/O Modules

Getting Started

This chapter provides a basic overview of how to install, configure and operate your PETL/tET/tPET

series module.

3.1 Mounting the Module

The PETL/tET/tPET series module can be mounted by attaching the bottom of the chassis to a DIN-Rail,

or the wall or it can be piggybacked to another module.

DIN-Rail Mounting

The PETL/tET/tPET series modules include simple rail clips on

the bottom of the chassis that allow them to be reliably

mounted on a DIN-Rail or a wall, or they can be piggybacked to

another module. For more detailed information regarding

DIN-Rail Mountng, refer to the illustration in figure below.

Mounting on a DIN-Rail

Dismounting from a DIN-Rail

ICP DAS CO., LTD.

PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 37

ГК

Атлант

Инжиниринг

–

официальный

представитель

РФ

СНГ

+7(495)109-02-08 [email protected] www.bbrc.ru

Summary of Contents for tET Series























































































































Search results

Summary of Contents for tET Series

Reviews:

ICP DAS USA tET Series, User Manual, Page: 37 / 118

Search results

Summary of Contents for tET Series

Reviews: