Ethernet I/O Modules
4.6 Filter
Clicking the
Filter
tab will display the
Filter Settings
page allowing you configure the IP Filter list for
the PETL/tET/tPET device, which will be described in more detail below.
4.6.1 Filter Settings
The
Filter Settings
page is used to query or edit the IP Filter List for the PETL/tET/tPET series module.
The IP filter list restricts the access of incoming packets based on the IP header. If one or more IP
addresses are saved to the IP Filter table, only Clients whose IP address is specified in the IP Filter List
will be able to access the PETL/tET/tPET series module.
The following table provides an overview of the parameters contained in the IP Address Configuration
section:
Item
Description
Add “IP” to the List
This parameter is used to add an IP address to the IP Filter List.
Delete IP # “number”
This parameter is used to delete IP# address from the IP Filter List.
Delete All
This parameter is used to delete all IP address current contained in the IP
Filter List.
Save to Flash
This parameter is used to save the updated IP Filter List to the Flash memory.
Check the checkbox before clicking the Submit button of you wish to store the
most recent list.
Submit
Click this button to save the revised settings to PETL/tET/tPET device.
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 59
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
