Ethernet I/O Modules
1.
Ethernet Port
The PETL/tET/tPET series module are equipped with an RJ-45 jack that is used as the 10/100 Base-TX
Ethernet port and features networking capability. When an Ethernet link is detected and an Ethernet
packet is received, the
Link/Act LED (Green)
indicator and the
10/100 M LED (Yellow)
indicator will
be illuminated.
The Ethernet port supports PoE (Power-over-Ethernet) functions for PETL/tPET series modules
only.
2.
J1 Connector
The type of J1 connector used depends on the type of PETL/tET/tPET series module. For more
detailed information regarding the pin assignments for the J1 Connector, please refer to
DC Power Input:
The definition for “(R)+Vs” and “(B)GND” for use as
the power supply applies to all types of PETL/tET/tPET
series module.
Module
Pin
Name
Function
PETL-7060
8
(R)+Vs
+12 to +48 V
DC
Power Input
9
(B)GND
Ground Connection
tET/tPET
3
(R)+Vs
+12 to +48 V
DC
Power Input
4
(B)GND
Ground Connection
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 15
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
