Ethernet I/O Modules
4.2.3 General Configuration Settings
The following table provides an overview of the parameters contained in the General Settings section:
Item
Description
Ethernet Speed
This parameter is used to set the Ethernet speed. The default value is Auto
(Auto = 10/100 Mbps Auto-negotiation).
System Timeout
(Network Watchdog)
This parameter is used to configure the system timeout value. If there is no
activity on the network for a certain period of time, the system will be
rebooted based on the configured system timeout value.
TCP Timeout (Seconds)
This parameter is used to configure the TCP timeout value. If Modbus TCP
communication is idle for a certain period of time, the system will cut off the
connection.
Web Auto-logout
This parameter is used to configure the automatic logout value. If there is no
activity on the web server for a certain period of time, the current user
account will automatically logged out.
Alias Name
This parameter is used to assign an alias name for each PETL/tET/tPET device to
assist with easy identification.
Update Settings
Click this button to save the revised settings to the PETL/tET/tPET device.
ICP DAS CO., LTD.
PETL/tET/tPET DIO Series User Manual, Ver. 2.1, Sep. 2014, Page: 50
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
