manualshive.com logo in svg

ICP DAS USA CAN-8123, User Manual, Page: 105 / 195

Share
Download
ICP DAS USA CAN-8123 User Manual Download Page 105

 

CAN-8123/CAN-8223/CAN-8423 user’s manual (Revision 3.00, May/22/2009) ------ 

105

 

 

 

TxPDO Information 

 

 

 

 

Standardized Device Profile Area Information 

 

After concluding the above preparations, the several functions of PDO 

communication will be introduced as follows. 

 

z

  The function of accessing digital I/O & analog I/O with asynchronous 

PDO. 

z

  The function by using Event Timer to obtain the input value. 

z

  The function of the acyclic and synchronous RxPDO. 

z

  The function of the acyclic and synchronous TxPDO. 

z

  The function of the cyclic and synchronous TxPDO. 

z

  The function of the synchronous and RTR-only TxPDO. 

z

  The function of the asynchronous and RTR-only RxPDO. 

z

  The function of the dynamic PDO mapping for DI/AI/DO/AO channels 

Summary of Contents for CAN-8123




































































































































































































Reviews:

No comments