iConyx IC16/8A Owner'S Manual Download Page 14

Page: 14 / 50

You will be prompted with the following screen. Click “Install the software automatically (Recommended)” and then click

on Next. Windows will find the appropriate driver automatically.

After Windows finds the appropriate driver, you will be notified that the driver has not passed Windows Logo testing with the

following message. Click on “Continue Anyway”. Windows will finish the driver installation. Click “Finish” when prompted.

You have now completed the USB to RS422 adapter driver installation.

FOR WINDOWS 2000 USERS

With the PC on and Windows running, insert the Iconyx Software CD into your CD drive. Connect the USB to RS422

adapter to an available USB1.1 compatible USB port. Windows will notify you that it has found new hardware (USB to

Serial Cable) and start the Found Neww Hardware Wizard. Click on Next to continue. (If you do not receive this message

window, skip ahead to page 17 and the section “If Windows Did Not Prompt To Install Drivers automatically”).

You will be prompted with the following screen. Click “Search for a suitable driver for my device (Recommended) and

then click on Next.

Owners Manual

Summary of Contents for IC16/8A



















































Search results

Summary of Contents for IC16/8A

Reviews:

Related manuals for IC16/8A

Brands by name

Popular brands

iConyx IC16/8A, Owner'S Manual

Search results

Summary of Contents for IC16/8A

Reviews:

Related manuals for IC16/8A

Brands by name

Popular brands