22
The next step is to add an Iconyx array to the project and place it in the graphic. There are several ways to do this. You
can go to the
Project
pull down menu, select
Add Array
and click on the array you want to add or you can go to the
New
Array
icon in the Tool Bar section and then select the desired array.
You can also right click on the floor plan graphic and then select
Add Array
from the pop up menu. Notice that when you
use this method, the coverage graphic is automatically inserted into the floor plan graphic.
Selecting an array will add the selected array to the
Arrays in Project
listing at the bottom of the window. You can then grab
it with your mouse cursor and place it and it’s coverage display in the floor plan drawing. See below.
Owners Manual
