iConyx IC16/8A Owner'S Manual Download Page 12

Page: 12 / 50

INSTALLING THE USB TO RS422 ADAPTER DRIVERS

Normally the USB to RS422 adapter and serial extension cable is installed before any of the software programs. However,

the USB to RS422 adapter and software programs can be installed in any order.

The USB to RS422 adapter is required for communications (data transfer) between the Iconyx column arrays and the Array

II and Canvas software programs. The Iconyx Software CD includes the driver needed to install the USB to RS422

adapter.

Before starting the installation make sure the USB to RS422 converter and serial extension cable is not

connected to any of the Iconyx column arrays.

FOR WINDOWS VISTA USERS: Use Windows Update to find the correct driver.

FOR WINDOWS XP USERS

With the PC on and Windows running, insert the Iconyx Software CD into your CD drive. Connect the USB to RS422

adapter to an available USB1.1 compatible USB port. Windows will prompt you with the following message. (If you do not

receive this message window, skip ahead to page 17 and the section “If Windows Did Not Prompt To Install Drivers auto-

matically).

Select the option to not search Windows Update by clicking on “No, not this time” and then on Next to continue.

Owners Manual

Summary of Contents for IC16/8A



















































Search results

Summary of Contents for IC16/8A

Reviews:

Related manuals for IC16/8A

Brands by name

Popular brands

iConyx IC16/8A, Owner'S Manual

Search results

Summary of Contents for IC16/8A

Reviews:

Related manuals for IC16/8A

Brands by name

Popular brands