23
ARRAY PROPERTIES
To open the Array Properties section of Beamware 2, click on the
Array Properties
tab in the main Beamware 2 window.
This will open a Select Array prompt listing the arrays you inserted into the project under
Layout
and asking you to select
one of them (see below). Note that the program will not allow you to enter the Array Properties section until you have
added an array to the project.
Select the array you want to work with and press
OK
to open the Array Properties window shown below.
Before you go any further, you should first verify that you are using the correct measurement system (feet or meters). The
default measurement system is feet, so you may want to change to Metric (meters).
Owners Manual
