13
2
BASIC OPERATION
■
Power save function
The power save function conserves the vessel's
battery power by pausing the transmission. The
standby (pausing) times are selectable (rotation
number is fixed to 10).
For example, when 1 minute is selected, the scanner
rotates 10 revolutions, then stops for 1 minute, and
then repeats this sequence while the power save
mode is activated.
D
Setting the scanning standby time
1.
Push [MENU]/[
]
2. Push [
t
] or [
u
] to select the System menu.
3. Push [
p
] or [
q
] to select the “Save Time” item.
4. Push [ENTER]/[
] to enter the option selection
mode.
5. Push [
t
] or [
u
] to select the standby time.
L
1, 6, 15, and 30 minutes are selectable.
6. Push [ENTER]/[
] to save the setting.
7.
Push [MENU]/[
] to exit the Menu screen.
D
Entering the power saving mode
1. Hold down [TX (SAVE)]/[
] for 1 second
to enter the power save mode.
•The “SAVE” indicator is displayed in the upper right of
the screen.
2. After the scanning rotations are finished,
transmission and rotation are suspended until the
selected standby time elapses.
•“SAVE” and standby time are displayed in the upper
right of the screen and the standby time is counted
down.
•After the selected standby time elapses, transmission
and rotation restart.
3. Push [TX (SAVE)]/[
] to cancel the power
save function.
•The save indicator turns OFF.
NOTE:
You can save more power by using the
Power save function with the Alarm function. In this
case, the LCD display is turned OFF until an object
enters the programmed alarm zone. (p. 21)
Counts down
the standby
time
Scan and STBY modes alternate
(MENU
w
System
w
Save Time
)