![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587006.webp)
1
PANEL DESCRIPTION
2
➏
VOLUME CONTROL [VOL]
Rotate [VOL] clockwise to increase volume and counter-
clockwise to decrease volume.
➐
RX/TX INDICATOR [RX/TX] (p. 12)
Lights green while receiving a signal or when the squelch is
open; lights red while transmitting.
➑
MONITOR SWITCH [MONI] (p. 12)
➥
Push and hold this switch to force the squelch
open; release to close it again.
➥
Push twice to keep the squelch open; push again
to close it.
➥
While pushing this switch, rotate [DIAL] to set the
squelch level.
➥
While pushing [PTT], push this switch to transmit
a DTMF memory.
➒
POWER SWITCH [POWER]
Push for 1 sec. to toggle power ON and OFF.
• Battery voltage appears for 1 sec. after power ON.
➓
BAND SWITCH [BAND/SCAN]
➥
Push to toggle between VHF and UHF operation
except in memory mode (p. 10).
➥
Push and hold to indicate the selected scan
range (or band) and to start scanning (p. 18).
• While scanning, each push of this switch changes the
selected scan range.
SCAN
BAND
POWER
MONI
➊
PTT SWITCH [PTT] (p. 12)
Push and hold to transmit; release to receive.
➋
LOCK SWITCH [LOCK]
Slide up to turn the lock function ON.
• [PTT], [VOL], [H/L], [MONI] and [POWER] function even
when the lock function is activated.
➌
ANTENNA CONNECTOR (p. 9)
Connects the supplied antenna.
➍
EXTERNAL SPEAKER AND MICROPHONE JACKS
[SP/MIC]
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when either is connected. (See p. 28 for options.)
D
External connection
➎
TUNING DIAL [DIAL]
Rotate [DIAL] to set an operating frequency, select a mem-
ory channel, select set mode contents, change scan direc-
tion, etc.
This connec-
tion does not
apply when a
condensor mi-
crophone is
connected.
Remote
Audio out
(8
Ω
)
[SP]
MIC
3.5 V
PTT
[MIC]
Audio input
PTT
33 k
Ω
(2 k
Ω
)