Universal Transmitter (UT-15SL)
Universal Transmitter monitors the opening/closing of specified device that is connected to it. If any alarm is triggered by the
connected device, the Universal Transmitter transmits the alarm signal to Control Panel to notify users of an alarm event.
Universal Transmitter design consists of a cover and base. The cover contains all electronics and the base provides a means
for fixing the device.
The Universal Transmitter includes two models according to availability of tamper switch.
UT-15SL-F1: Tamper switch available
UT-15SL-NT-F1: Tamper switch removed
P
P
a
a
r
r
t
t
s
s
I
I
d
d
e
e
n
n
t
t
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
1. LED indicator a.k.a. Learn / Test button
2. Mounting Holes
Used to fixed and screw the Universal Transmitter directly onto
the Door Frame or Wall, covered by white caps.
3. Tamper Switch
Provides tamper protection against unauthorized device opening
and/or removal from mounting surface.
4. Battery Insulator
5. Fixing Screw
Screw used to secure the top and bottom case of the Universal
Transmitter.
6. Extension Terminal 1
Used for Door Contact, IR, Smoke Detector or Panic Button connection
7. Extension Terminal 2
Used for Roller shutter connection
8. DIP Switch
SW1
Terminal 1 Type = Door Contact
ON
Enable (Default)
OFF
Disable
SW2
Terminal 1 Type = IR
ON
Enable
OFF
Disable (Default)
SW3
Terminal 1 Type = Smoke Detector
ON
Enable
OFF
Disable (Default)
SW4
Terminal 1 Type = Panic Button
ON
Enable
OFF
Disable (Default)
SW5
Supervision
ON
Enable (
Default
)
OFF
Disable
SW6
CON4 NO/NC
ON
Normal open
OFF
Normal close (Default)
SW7
Roller shutter Activation
ON
8 pulse / 10sec
OFF
5 pulse / 10sec (Default)
SW8
Reserved
1
