![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587015.webp)
3
BASIC OPERATION
11
■
Setting tuning steps
This transceiver has 8 tuning steps (VHF and UHF bands
have independent settings) as follows:
• 5 kHz
• 10 kHz
• 12.5 kHz
• 15 kHz
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
➀
Push [VFO] to select VFO mode.
➁
Push [BAND] to select the VHF or UHF band.
➂
Push [
(H/L)
SET] for 1 sec. to enter set mode.
➃
Push [TONE] or [H/L] several times until “TS” appears.
➄
Rotate [DIAL] to select the desired tuning step.
➅
Push [
(VFO)
CLR] to exit set mode.
For convenience, select a tuning step that matches the fre-
quency intervals of repeaters in your area.
[DISPLAY EXAMPLE]
15 kHz tuning step
25 kHz tuning step
USING
SET MODE
D
Via the keypad
(other band directly)
➀
Push [VFO] to select VFO
mode.
➁
Push 6 digit keys, starting
from the 100 MHz digit.
• The operating band changes
automatically.
• It’s not necessary to input the
decimal point.
D
Other methods
➥
VIA THE DIAL: Rotate [DIAL] to change the frequency ac-
cording to the set tuning steps.
➥
USING THE MHz STEP: Push [
(VFO)
MHz] for 1 sec., then
rotate [DIAL] to change the frequency in one MHz steps.
0
0
0
0
4
4