![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587007.webp)
1
PANEL DESCRIPTION
3
!1
OUTPUT POWER SWITCH [H/L(SET)]
➥
Push to toggle between low and high output
power (p. 12).
• “LOW” appears when low output power is selected.
➥
Push and hold to enter set mode.
!2
TONE SWITCH [TONE(DUP)]
➥
Push this switch to activate the following func-
tions in order (pgs. 21, 22).
• Subaudible tone encoder—“T” appears.
• Pocket beep—“T SQL
S
” appears.
• Tone squelch—“T SQL” appears.
• No tone operation—no indicator appears.
➥
Push this switch for 1 sec. to select semi-duplex
or simplex operation (p. 13).
• “– DUP” appears during minus duplex operation,
“DUP” appears during plus duplex operation and no
indicator appears during simplex operation.
➥
For the European version only, while pushing
[PTT], push this switch to transmit a 1750 Hz
tone burst signal (p. 13).
!3
VFO/CLEAR KEY [VFO(CLR MHz)
;
;
]
➥
Clears some functions, such as digit input before
entry, scan, etc.
➥
Push this key to select VFO mode (p. 10).
➥
Push and hold for 1 sec., then rotate [DIAL] to
change the MHz digit (p. 11).
➥
While pushing [PTT], this key sends a DTMF “A.”
CLR MHz
VFO
A
DUP
TO
NE
SET
H
L
!4
MEMORY MODE KEY [MR(SKIP)
<
<
]
➥
Push this key to select memory mode (p. 12).
• “
X
X
” appears while in memory mode.
➥
While in memory mode, push this key for 1 sec.
to toggle the selected memory channel between
a skip and a non-skip channel (p. 20).
• “SKIP” appears when the channel is set as a skip
channel.
➥
While pushing [PTT], this key sends a DTMF “B.”
!5
CALL MODE KEY [CALL
=
=
]
➥
Push this key to select the call channel (p. 15).
• “C” appears while the call channel is selected.
➥
While pushing [PTT], this key sends a DTMF “C.”
!6
SELECT MEMORY WRITE KEY [S.MW(MW)
>
>
]
(pgs. 15, 16)
➥
Push this key to enter memory select mode.
• “
X
” flashes and the [DIAL] can be used for channel
selection (for memory writing or clearing).
➥
Push and hold for 1 sec. to write the set contents
into the selected memory channel (or VFO, call
channel).
➥
Push then push and hold this key while in mem-
ory select mode to erase the contents of the se-
lected memory channel.
➥
While pushing [PTT], this key sends a DTMF “D.”
MW
S.MW
D
CALL
C
SKIP
MR
B