![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587020.webp)
4
ADVANCED FUNCTIONS
16
D
Programming after selection
➀
Select the memory channel to be programmed:
➥
Push [MR] to select memory mode.
➥
Rotate [DIAL] (or use the keypad) to select the memory
channel.
• Non-programmed channels cannot be selected.
➁
Set the desired frequency in VFO mode:
➥
Push [VFO] to select VFO mode.
➥
Set the desired frequency using the keypad or [DIAL].
➥
Set other data, if desired.
➂
Push [S.MW] for 1 sec. to program.
D
Memory/call
➾
VFO
➀
Select the memory/call
channel to be transferred:
➥
Push [MR] (or [CALL])
to select memory (call)
mode.
➥
Rotate [DIAL] (or use
the keypad) to select the
memory channel.
➁
Push [S.MW] for 1 sec. to
transfer to VFO.
D
Memory/call
➾
call/memory
➀
Select the memory/call channel to be transferred:
➥
Push [MR] (or [CALL]) to select memory (call) mode.
➥
Rotate [DIAL] (or use the keypad) to select the memory
channel.
➁
Push [S.MW] momentarily.
• A beep sounds, “VF” appears and “
X
” flashes.
• Do not hold [S.MW] for more than 1 sec., otherwise the memory
channel will overwrite the VFO.
➂
Rotate [DIAL] to select a memory or call channel to transfer
the data.
➃
Push [S.MW] for 1 sec. to program.
• “
X
” stops flashing.
D
Memory clear
➀
Push [S.MW] momentarily.
➁
Select the memory channel to be cleared with [DIAL].
➂
Push [S.MW] briefly, then a second time for 1 sec.
• 3 beeps sound, then the frequency is cleared.
• “
X
” flashes continuously.
• Scan edges 1A and 1B and call channels cannot be cleared.
➃
Push [
(VFO)
CLR] to stop the flashing.
NOTE: Be careful — the contents of cleared memories
CANNOT be recalled.
DUP
DUP
VFO mode selected
for
1 sec.
Memory mode
MW
S.MW
D