![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587024.webp)
4
ADVANCED FUNCTIONS
20
D
Scan resume condition
The resume condition can be selected as a pause or timer
scan. This setting is common for all scans.
When receiving a signal, pause
scan pauses until the signal
disappears; timer scans pauses
for 10 sec.
➀
Push [
(H/L)
SET] for 1 sec. to enter
set mode.
➁
Push [H/L] or [TONE] one or more
times until “SC” appears.
➂
Rotate [DIAL] to select the desired
scan resume condition.
• “T-10”: scan pauses for 10 sec. on a
received signal.
• “P-02”: scan pauses on a received signal until it disappears.
➃
Push [
(VFO)
CLR] to exit set mode.
D
Setting a skip channel
Memory channels can be set to be skipped during memory
scan. This is useful to speedup the memory scan interval.
➀
Select the memory channel to be programmed as a skip
channel:
➥
Push [MR] to select memory mode.
➥
Rotate [DIAL] (or use the keypad) to select a memory
channel.
➁
Push [
(MR)
SKIP] for 1 sec. to set
the memory channel as a skip
channel.
• “SKIP” appears.
➂
Repeat step
➁
to cancel a skip
channel.
• “SKIP” disappears.
R
USING
SET MODE
MR
SKIP
MR
NOTE: Scan edge channels, 1A to 4B, cannot be set to
show “SKIP” settings, however, they will be skipped dur-
ing memory scan.
Pause
scan
Receiving
a signal
Timer
scan
10 sec.
2 sec.