![background image](http://html2.mh-extra.com/html/icom/ic-t7h/ic-t7h_instruction-manual_4733587021.webp)
4
ADVANCED FUNCTIONS
17
D
Transmitting a DTMF code
➀
Select the DTMF channel to be transmitted:
➥
Push [
(
•
)
DTMF] for 1 sec. to select DTMF memory mode.
➥
Rotate [DIAL] to select the desired DTMF channel.
➁
While pushing [PTT] push [MONI] to transmit the selected
DTMF channel’s contents.
D
DTMF transmit speed
When slow DTMF transmission speeds are required (such as
for some repeaters) the transceiver’s rate of DTMF transmis-
sion can be adjusted. See p. 25 for details.
■
DTMF memory operation
D
Programming a DTMF code
The transceiver has 9 DTMF memory channels (D1 to D9) for
storage of often-used DTMF codes of up to 16 digits.
➀
Push [
(
•
)
DTMF] for 1 sec. to enter
DTMF memory mode.
➁
Rotate [DIAL] to select the desired
channel.
➂
Push [
(H/L)
SET] for 1 sec. to enter
DTMF programming mode.
• “_ _ _ _ _ _” appears.
• Programmed memories can be
cleared in this way.
➃
Push digit keys to enter the de-
sired DTMF code.
• A maximum of 16 digits can be input.
• If a digit is mistakenly input, push
[H/L] then repeat from step
➂
.
➄
Push [
(H/L)
SET] to input the digits.
• A beep sounds.
➅
Push [VFO] or [MONI] to exit DTMF programming mode.
• When pushing [MONI], the programmed contents can be moni-
tored.
AT
POWER ON