![background image](http://html2.mh-extra.com/html/icom/ic-m602/ic-m602_instruction-manual_5210088050.webp)
8
SET MODE
44
Beep tone
Beep
Scan type
Scan type
Weather alert
WX Alert
Scan resume timer
Scan timer
Attenuation level
RF
Attenuator
Scrambler code
Scrambler
code
Scrambler type
Scrambler
type
Dual/tri-watch of COMMANDMIC
Dual/Tri COMMANDMIC
LCD contrast
Contrast
Rotate
[CHANNEL]
Push
when using HM-127
˘Scan Type
˘
Scan Timer
˘
Dual/Tri COMMANDMIC
--Set Mode--
˘
Internal Speaker
˘
Beep
˘
WX Alert
˘
Contrast
˘
RF Attenuator
˘
Scrambler Type
˘
Exit
˘
Scrambler Code
˘
Foghorn Frequency
Foghorn Frequency
Foghorn Frequency
and
Internal speaker
items are
not selectable when using HM-127.
■
Set mode programming
Set mode is used to change the conditions of the trans-
ceiver’s functions: scan type (normal or priority), scan resume
timer, weather alert, dual/tri-watch of COMMANDMIC, trans-
ceiver’s beep tone, internal speaker, LCD contrast, RF atten-
uation level, automatic fog horn frequency, scrambler type
and scrambler code.
Available functions may differ depending on dealer setting.
q
Turn power OFF.
w
While pushing [16•9], turn power ON to enter set mode.
e
After the display appears, release [16•9].
r
Rotate [CHANNEL] to select the desired item, push [ENT].
Or push [16•9] to select the item when using an optional
HM-127.
t
Rotate [CHANNEL] to select the desired condition of the
item. Use [
Y
]/[
Z
] when using an optional HM-127.
y
Rotate [CHANNEL] to select “
Exit
,” push [ENT] to exit
set mode and returns to normal operation condition
• SET MODE CONSTRUCTION