![background image](http://html2.mh-extra.com/html/icom/ic-m602/ic-m602_instruction-manual_5210088012.webp)
■
Function display
q
BUSY/TRANSMIT INDICATOR
(p. 10)
➥
“
BUSY
” appears when receiving a signal or when the
squelch opens.
➥
“
TX
” appears while transmitting.
w
RECEIVER ATTENUATOR INDICATOR
(p. 10)
“
LOCAL
” appears when the receiver attenuator is in use.
e
SCRAMBLER INDICATOR
(p. 13)
“
SCRAM
” appears when an optional voice scrambler is ac-
tivated.
r
SCAN INDICATOR
➥
Either “
NORMAL SCAN
” or “
PRI-SCAN 16
” scan
type appears while scanning. (p. 17)
➥
“
DUAL 16
” appears during dualwatch; “
TRI 16
”
appears during tri-watch. (p. 15)
t
POSITION INDICATOR
➥
Shows the GPS position data.
• “
??
” may blink every 2 sec. instead of position data when
the GPS position data is invalid. In such a case, the last
position data is held for up to 23.5 hours.
• “
??
” may blink every 2 sec. instead of position data 4
hours after the position data is input manually, up until
23.5 hours have past.
➥
“
No Position
” appears when no GPS receiver is con-
nected and no position data is input manually.
y
TIME ZONE INDICATOR
➥
“
Local
” appears when the offset time data in the ‘Set
up’ menu is entered. (p. 36)
➥
“
No Time
” appears when no GPS receiver is con-
nected and no time data is input manually.
u
CHANNEL COMMENT INDICATOR
➥
Channel comment appears if programmed. (p. 11)
➥
“
Low Batt
” flashes when the battery voltage drops to
approx. 10 V DC or below.
BUSY
-
25W
---
INT
---
CALL
LOCAL
--
DUP
SCRAM
--
TAG
NORMAL
-
SCAN
-
34"34.506N
123"23.236W
Local
--
1:10
--
CALLING
w
q
e
t
y
r
!2
!3
!1
!0
o
i
u
PANEL DESCRIPTION
6
2