![background image](http://html2.mh-extra.com/html/icom/ic-m602/ic-m602_instruction-manual_5210088023.webp)
5
SCAN OPERATION
17
Push
SCN
GHI
then
Scan starts.
When a signal is received
BUSY-
25W
---
INT
---CALL
LOCAL--
DUP
SCRAM--
TAG
NORMAL-SCAN
-
34"34.206N
123"23.236W
--
UTC
-
10:10
---
INTL
-
BUSY-
25W
---
INT
---CALL
LOCAL--
DUP
SCRAM--
TAG
NORMAL
-
SCAN
-
34"34.206N
123"23.236W
--
UTC
-
10:10
---INTL-
4
BUSY
-
25W
---
INT
---CALL
LOCAL--
DUP
SCRAM--
TAG
NORMAL
-
SCAN
-
34"34.206N
123"23.236W
--
UTC
-
10:10
---INTL-
[Example]:
Starting a normal scan.
■
Setting tag channels
For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Chan-
nels set as non-tag channels will be skipped during scanning.
Tag channels can be assigned to each channel group
(U.S.A., International, Canada) independently.
q
While pushing [H/L], push [CH/WX•U/I/C] one or more
times to select the desired channel group, if desired.
w
Select the desired channel to set as a tag channel.
e
Push [
F
], then push [5
TAG
] to set the displayed channel
as a tag channel.
• “
TAG
” appears in the display.
r
To cancel the tag channel setting, repeat step
e
.
• “
TAG
” disappears.
• Clearing all tag channels in the selected channel group
➥
While pushing [H/L], push [5
TAG
] for 3 sec. to clear all tag
channels in the channel group.
■
Starting a scan
Set scan type (priority or normal scan) and scan resume timer
in advance using set mode. (p. 45)
q
Set tag channels as described at left.
w
Make sure the squelch is closed to start a scan.
e
While pushing [H/L], push [CH/WX•U/I/C] one or more
times to select the desired channel group, if desired.
r
Push [
F
], then push [4
SCN
] to start priority or normal scan.
• “
PRI-SCAN 16
” or “
NORMAL SCAN
” appears in the function
display.
• When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to set mode set-
ting. (Channel 16 is still monitored during priority scan.)
• Rotate [CHANNEL] to check the scanning tag channels, to
change the scanning direction or resume the scan manually.
• “
16
” blinks and a beep tone sounds when a signal is received
on Channel 16 during priority scan.
t
To stop the scan, push [CLR] or repeat step
r
.
5