![background image](http://html2.mh-extra.com/html/icom/ic-m602/ic-m602_instruction-manual_5210088031.webp)
25
6
DSC OPERATION
D
D
Transmitting Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q
Push [MENU] to enter the DSC menu.
w
Rotate [CHANNEL] to select “
Group Call
,” push
[ENT].
e
Rotate [CHANNEL] to select the desired pre-programmed
group address or “
Manual Input
,” push [ENT].
• The ID code for the group call can be set in advance. (p. 33)
• When “
Manual Input
” is selected, set the 8-digit ID code for
the group you wish to call with keypad.
r
Rotate [CHANNEL] to select a desired intership channel
or “
Manual Input
,” push [ENT].
• When “
Manual Input
” is selected, rotate [CHANNEL] to se-
lect the desired channel other than Channel 70.
t
Push [ENT] to transmit the group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
y
After the group call has been transmitted, the following in-
dication is displayed.
u
Push [CLR] to exit the condition.
Group Call
TX Complete
<CLR˘Exit>
--DSC Menu--
Group Call ready
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Select Address
<CLR˘Exit / ENT˘OK>
˘
Manual Input
˘
Osaka
--DSC Menu--
˘
˘Tokyo
˘
I-com
Select item
˘
Received Calls
˘
Individual Call
˘
All Ships Call
--DSC Menu--
˘
Polling Request
˘
Position Request
˘Group Call
6