![background image](http://html2.mh-extra.com/html/icom/ic-m602/ic-m602_instruction-manual_5210088075.webp)
69
13
HM-127 REMOTE-CONTROL MICROPHONE
■
Set mode programming
Set mode is used to change the condition of the transceiver’s
functions and the microphone’s own functions:
Transceiver’s functions—
scan type (normal or priority), scan resume timer, weather
alert, dualwatch/tri-watch of COMMANDMIC, transceiver’s
beep tone, internal speaker (transceiver), LCD contrast
(transceiver), RF attenuation level, foghorn frequency, scram-
bler type and scrambler code.
Microphone’s own functions—
beep tone function (microphone) and LCD contrast (micro-
phone).
In this section, instructions are for the microphone’s own func-
tions only. Refer to pgs. 44–47 for the setting of the other
functions. (Some functions cannot be selected from the mi-
crophone.)
D
D
Entering set mode
q
Turn power OFF.
w
While pushing [16•9], turn power ON.
• After a beep emission, a set mode item (in the channel name indi-
cator and the condition in the channel number readout) is displayed.
e
Push [16•9] to select the desired item, if necessary.
r
Push [
Y
]/[
Z
] to select the desired condition of the item.
t
Turn power OFF, then ON to exit set mode.
• Beep tone
“BEEP”
➥
Push [
Y
] to turn ON, [
Z
] to turn OFF the beep output.
• LCD contrast
“LCD CONTRAST”
➥
Push [
Y
]/[
Z
] to adjust to a suitable LCD contrast.
Push
• •
• •
Push
13