background image

30

6

DSC OPERATION

Setting the distress information

The nature of the distress call should be included in the dis-
tress call.

q

Push [MENU] to enter the DSC menu.

w

Rotate [CHANNEL] to select “

Distress  Setting

,”

push [ENT].

e

Rotate [CHANNEL] to select the nature of the distress,
push [ENT].

• ‘Undesignated,’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’ ‘Grounding,’

‘Capsizing,’ ‘Sinking,’ ‘Adrift (Disable adrift),’ ‘Abandoning (Aban-
doning ship),’ ‘Piracy (Piracy attack)’ and ‘MOB (Man overboard)’
are available.

r

The position information appears. Set the current position,
then push [ENT].

• Edit the digit of your position data directly with the keypad.
• Push [6•

] to edit N; North latitude or [7•

] to edit 

S; South latitude.

• Push [3•

] to edit E; East longitude or [9•

] to edit 

W; West longitude.

• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the position data.

WXY

DEF

PRS

MNO

Select Nature

˘

Undesignated

˘

Flooding

--DSC Menu--

˘

˘

Collision

˘

Grounding

˘

Abandoning

˘

Capsizing

˘

Sinking

˘

Adrift

<CLR˘Exit  /  ENT˘OK>

˘

Piracy

˘

MOB

˘-----

˘Explosion

Select item

˘

Exit

˘

Position Request

˘

Received Calls

--DSC Menu--

˘

Set up

˘Distress Setting

˘

Polling Request

Summary of Contents for IC-M602















































































Reviews: