![background image](http://html.mh-extra.com/html/icom/ic-f8101/ic-f8101_instruction-manual_612676099.webp)
5
V4.01–
A-7264-2EX
Command table (Continued)
Cmd.
Sub
cmd.
Set mode
Data
Description
Category Item
1A
37
0000
to
0002
Send/read the TX status
( 0000=RX, 0001=TX by PTT,
0002=TX by ACC PTT)
• If you want to change the TX
status between the PTT and ACC
PTT, first change to the RX status,
then select the TX status.
38
Send/read the memory channel
(ASCII 1 to 20 characters)
40
Send the Hangup command
While calling: Stop calling
While linking the Selcall Phone Link
or ALE link, sends the disconnect
call.
41
See
p. 6
Send the ALE Call output setting
42
See
p. 7
Send the Selcall output setting
50
00/01 Send/read the Priority Network
setting
60
See
p. 7
Read the GPS position
A3
See
p. 7
Read the Model information
1C
00
00/01 Send/read the PTT output setting
(00=RX, 01=PTT TX)
01
00 to
02
Send the Antenna tuner operation
( 00=Through, 01=Tuner ON,
02=Manual tune)
Read the Antenna Tuner status
(00=Tuner ON, 01=Through)