Icom IC-F8101 Instruction Manual Download Page 12

Page: 12 / 101

2001 NEW

PANEL DESCRIPTION

2001 NEW

CALL ICON

Displays the Call type icons for Selcall or ALE.

<Selcall>

• The “

” icon blinks or appears when a Selective call is

transmitted or linked.

• The “

” icon blinks or appears when a Phone call is

transmitted or linked.

• The “

” icon blinks when a Message call is transmit-

ted.

• The “

” icon blinks when a Send Position is transmit-

ted.

• The “

” icon blinks when a Get Position call is trans-

mitted, or while waiting for its acknowledgement.

• The “

” icon blinks when a Get Status call is transmit-

ted, or while waiting for its acknowledgement.

• The “

” icon blinks or appears when an Emergency

call is transmitted or linked.

• The “

” icon blinks when a Channel Test call is trans-

mitted or while waiting for its acknowledgement.

• The “

” icon blinks or appears when an RFDS Emer-

gency call is transmitted or linked.

<ALE>

• The “

” icon blinks when an Individual or Individual

Update LQA calls is transmitted, or while waiting for an
acknowledgement. The icon stays ON when the Individ-
ual call is linked.

• The “

” icon blinks either when a NET or NET Up-

date LQA calls is transmitted or while waiting for an ac-
knowledgement. The icon stays on when the NET call is
linked.

• The “

” icon blinks either when an Individual AMD,

NET AMD, Unlink Individual AMD or Unlink NET AMD
calls is transmitted, or while waiting for an acknowledge-
ment. The icon stays ON when the Individual AMD or
NET AMD calls is linked.

• The “

” icon blinks when a Sounding is transmitted.

•

Memory Channel Display

■

LCD screen (Continued)

Summary of Contents for IC-F8101






































































































Search results

Summary of Contents for IC-F8101

Reviews:

Related manuals for IC-F8101

Brands by name

Popular brands

Icom IC-F8101, Instruction Manual

Search results

Summary of Contents for IC-F8101

Reviews:

Related manuals for IC-F8101

Brands by name

Popular brands