37
4
SELCALL/ALE OPERATION
2001 NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
The ALE AMD (Automatic Message Display) sends
and receives test messages of up to 90 characters.
The Unlink AMD call is used to transmit just message
without conversation.
• Sending an Unlink Individual AMD
q
Hold down
[
]
for 1 second to enter the Network
selection screen.
w
Push
[
r
]
or
[
s
]
to select the desired Network, and
then push
[
]
.
• The Networks that belong to the ALE system must be
selected.
e
Push
[
r
]
or
[
s
]
to select the Call Type to “Unlink
Individual AMD.”
• “Individual,” “NET Call,” “Individual AMD,” “NET AMD,”
“Sounding” “Individual Update LQA,” “NET Update LQA,”
“Unlink Individual AMD,” and “Unlink NET AMD” are select-
able.
r
Push
[
r
]
or
[
s
]
to select the Individual ID, and then
push
[
]
.
• Only the IDs that belong to the Network selected in step
w
, are displayed.
t
Push
[
r
]
or
[
s
]
to select the Self ID, then push
[
]
.
• Only the IDs that belong to the Network selected in step
w
, are displayed.
y
Select the desired Message or make a New mes-
sage.
❍
Message selection
➥
Push
[
r
]
or
[
s
]
select the Message, and
then push
[
]
.
❍
New Message input
q
Hold down
[
4
]
to enter the input mode.
w
Push the keypad keys to enter the Message.
• Push
[A/a]
(#) to toggle between the Upper case
letter and Number input mode.
• Push
[
8
]
to delete the character, symbol or num-
ber to the left of the cursor.
• Push
[
t
]
(
§
) or
[
u
]
(
§§§
)
to move the cursor.
e
Push
[
4
]
to save the Message.
• This Message is not saved in the Message list.
u
Push
[
r
]
or
[
s
]
to select the Channel.
• Only the channels that belong to the Network selected in
step
w
, are displayed.
• If <Auto> is selected, the transceiver sequentially trans-
mits on channels that belong to the Network in the LQA
order.
i
Push
[
]
to transmit the Unlink Individual AMD
call.
• If the “AMD Position” item of “Setmode” is set to “Calling,”
the message is sent. (Setmode > ALE Set mode)
• While calling, push
[
]
or
[PTT]
to cancel the call.
• After calling, the transceiver waits for a response.
o
When the response is received, the caller transceiv-
er automatically transmits the Acknowledgement.
• If the “AMD Position” item of “Setmode” is set to “Ac-
knowledgement,” the message is sent. (Setmode > ALE
Set mode)
• The call is saved in the Call Out memory.
D
Unlink AMD call
Continued on the next page.
