Icom IC-F8101 Instruction Manual Download Page 84

Page: 84 / 101

CONNECTION AND INSTALLATION

2001 NEW

The RMK-6 allows you to install the IC-F8101’s Front
panel separately from the Main unit for added installa-
tion convenience and operation. Use either the optional
OPC-607, OPC-608, OPC-609 or OPC726

separation

cable

with the RMK-6.

The RMK-6 is the same as the one supplied in the
Separated type transceiver.

Supplied Accessories

Flat washers
(M5)

RMK-6 with Mounting
bracket

Spring washers
(M5)

Mounting screws
(M5 × 12 mm)

Cable clamps
(Screws

M2.6 × 5 mm)

Self-tapping screws
(M5 × 16 mm)

Screws
(M3 × 8 mm)

Hex socket screws

Nuts
(M5)

Separation

The optional OPC-607 (3 m; 9.8 ft), OPC-608 (8 m;
26.2 ft), OPC-609 (1.9 m; 6.2 ft) or OPC-726 (5 m;
16.4 ft)

separation

cable

is required for separately in-

stalling the transceiver Front panel and Main unit.

First, make sure the transceiver’s power is OFF,
then disconnect the DC power cable.

Remove the knob bolts and mounting bracket from
the RMK-6.

Unscrew the 4 hex socket screws using an allen
wrench, then remove the Front panel from the trans-
ceiver in the direction of the arrow.

• Separate the RMK-6’s Front panel attachment and Main

unit attachment in the same way.

RMK-6

Transceiver

Disconnect the connection cable from the Front
panel.

Front panel

Connection cable

Main unit

Front panel

■

RMK-6 (Optional Separation kit)

Summary of Contents for IC-F8101






































































































Search results

Summary of Contents for IC-F8101

Reviews:

Related manuals for IC-F8101

Brands by name

Popular brands

Icom IC-F8101, Instruction Manual

Search results

Summary of Contents for IC-F8101

Reviews:

Related manuals for IC-F8101

Brands by name

Popular brands