![background image](http://html.mh-extra.com/html/icom/ic-f8101/ic-f8101_instruction-manual_612676016.webp)
2001 NEW
10
2
BASIC OPERATION
2001 NEW
In the VFO mode, you can set a desired operating fre-
quency, operating mode and split frequency function.
NOTE:
• The VFO mode operation can be disabled by the
“VFO Mode” item of “Setmode.”
(Main Menu > Setmode > Config)
•
While in the VFO mode, the Selcall, ALE features,
Scan function or the Emergency key cannot be
used.
• Entering the VFO mode
q
Push
[
8
]
to enter the Main Menu screen.
w
Push
[
r
]
or
[
s
]
to select “VFO,” and then push
[
4
]
.
• Frequency setting
q
Push
[A/B]
(
§§
) to select VFO A or VFO B.
w
Push
[
t
]
(
§
) or
[
u
]
(
§§§
)
to move the cursor to se-
lect the desired digit to be changed.
• The cursor is displayed below the selected digit.
e
Push
[
r
]
or
[
s
]
to change the digit.
• Direct frequency setting
q
Push
[A/B]
(
§§
) to select VFO A or VFO B.
w
Hold down
[
4
]
for 1 second to enter the direct fre-
quency input mode.
• The previously entered frequency blinks.
e
Push the keypad keys to enter the desired frequen-
cy.
• Push
[
M
]
to enter the decimal point.
• Push
[
8
]
to delete the number.
• Push
[
t
]
(
§
) or
[
u
]
(
§§§
)
to move the cursor.
r
Push
[
4
]
to save the frequency and exit.
[
]
[
]
[
]
/
Keypad
• Turning ON the Split frequency function
q
Push
[
8
]
to enter the Main Menu screen.
w
Select the “VFO Split” item of “Setmode.”
q
Push
[
r
]
or
[
s
]
to select the item, and then
push
[
4
]
to open the screen.
(Setmode > Config)
w
Push
[
r
]
or
[
s
]
to select “VFO Split,” and then
hold down
[
4
]
for 1 second.
e
Push
[
r
]
or
[
s
]
to turn ON the function.
• If desired, hold down
[Default]
(
§§
) for 1 second to re-
turn to the default setting.
r
Push
[
4
]
to save the setting, and return to the pre-
vious screen.
t
Push
[
8
]
one or more times to exit the Main Menu
screen.
y
Enter the VFO mode. (See details to the left.)
u
Push
[A/B]
(
§§
) to select VFO A or VFO B, and sep-
arately set the receive and transmit frequencies.
• The TX frequency appears below the RX frequency.
• Push
[A/B]
(
§§
) changes the VFOs between transmit
and receive.
• Hold down
[A/B]
(
§§
) for 1 second to equalize the trans-
mit frequency to the receive frequency.
• To turn OFF the Split frequency function, set the “VFO
Split” item of “Setmode.” to “OFF.”
(Main Menu > Setmode > Config)
■
VFO operation