![background image](http://html.mh-extra.com/html/icom/ic-f8101/ic-f8101_instruction-manual_612676015.webp)
2001 NEW
9
2
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
The scan function repeatedly scans programmed
channels. This function is convenient to check for
calls on multiple channels.
[Stop]
q
Push
[
]
to start a scan.
• “Scanning” and the Scan type are displayed.
w
When a signal is received, the scan pauses on
that channel.
e
Push
[Stop]
(
§§
) to cancel the scan.
• Pushing
[
]
also cancels the scan.
NOTE:
The scan resume setting, the action after
receiving a signal, can be changed by the “Voice
Scan Resume” item of “Setmode.”
(Main Menu > Setmode > Config)
■
Scan function
The following modes are selectable in the IC-F8101:
LSB, USB, CW, AM, RTTY, LSBD1/2/3 and
USBD1/2/3.
NOTE:
Only the preset operating modes are se-
lectable.
The selectable operating modes can be changed in
the “Mode” item of “Setmode.”
(Main Menu > Setmode)
q
Select the Display mode.
q
Push
[
8
]
to enter the Main Menu screen.
w
Push
[
r
]
or
[
s
]
to select “Channel” or “VFO,”
and then push
[
4
]
.
w
Push
[Mode]
(3) one or more times to select the
desired mode.
• The selected mode icon appears at the top of the display.
NOTE:
• On the Memory Channel display, the selected
operating mode can be used only temporarily.
When the channel is changed, the transceiver
returns to the preset operating mode.
• Depending on the transceiver version or preset-
tings, some operating modes may not be select-
able or usable except in receive.
■
Mode selection
D
For your reference
Mode
TX/RX offset frequency
[Hz]
RX filter band width
[Hz]
Modulation input
MIC PTT ON
MODEM PTT ON
LSB, USB
1500 (Fixed)
100 to
3000
(100Hz step)
MIC
TC4, ACC,
USB
LSBD1, USBD1
1500, 1650,
1800
TC4
, ACC, USB
LSBD2, USBD2
1500
, 1650, 1800
TC4,
ACC
, USB
LSBD3, USBD3
1500,
1650
, 1800
TC4,
ACC
, USB
Default settings are shown in bold.