3
BASIC OPERATION
3-7
Setting the frequency (Continued)
D
Entering a Band Edge
When “ON (User)” or “ON (User) & TX Limit” is
selected on the “Band Edge Beep” screen, you can
enter a total of 30 band edge frequency pairs.
L
Initially, all Ham band frequencies are entered into the
first 3 band edges. Therefore, you must first edit or delete
them to enter a new band edge.
L
You cannot enter an overlapping frequency, or a
frequency that is out of the preset Ham band frequencies.
L
Band edges are entered from the lower frequency first.
1.
Open the “Band Edge Beep” screen.
MENU
» SET > Function >
Band Edge Beep
2.
Select “ON (User)” or “ON (User) & TX Limit.”
L
If you select “ON (User) & TX Limit,” you can limit
transmission to within the entered frequency range.
3. Select “User Band Edge.”
Rotate
Push
Rotate
Push
Editing a Band Edge
You can edit a band edge entered as a default or
when entering a new band edge.
1. On the FUNCTION set screen, select “User Band
Edge.”
2. Touch the band edge you want to edit for 1
second.
(Example: 2: 430.000.000
–
440.000.000 MHz)
Rotate
Push
3.
Edit the lower band edge frequency, then touch [ENT].
(Example: 430.1)
Entry example:
[
•
], [1], [ENT]
4.
Edit the upper band edge frequency, then touch
[ENT]. (Example: 439.1)
Entry example: [4] [3] [9]
[
•
], [9], [ENT]
• The edited band edge is saved and returns to the
previous screen.
TIP
:
You can also edit the frequency by rotating
MAIN DIAL
or
MULTI
.
•
Opens the “User Band Edge” screen.