Icom IC-9700, Basic Manual

Page: 44 / 96

5
SCOPE OPERATION
5-2
Spectrum scope screen (Continue)
D
Center mode
Displays signals around the operating frequency
within the selected span. The operating frequency is
always displayed in the center of the screen.
1. Display the SPECTRUM SCOPE screen.
MENU
» SCOPE
2. Touch [CENT/FIX].
L
Touch [CENT/FIX] to toggle between the Center and
Fixed modes.
3. Touch [SPAN] several times to select the scope
span.
• ±2.5, 5.0, 10, 25, 50, 100, 250 and 500 kHz
L
Touch [SPAN] for 1 second to select the ±2.5 kHz
span.
D
Fixed mode
Displays signals within a specified frequency range.
The selected frequency band activity can easily be
observed in this mode.
Three Fixed Edge bands can be set for each amateur
frequency band covered by the transceiver in the
SCOPE SET screen.
1. Display the SPECTRUM SCOPE screen.
MENU
»
SCOPE
2. Touch [CENT/FIX].
L
Touch [CENT/FIX] to toggle between the Center and
Fixed modes.
3. Touch [EDGE] several times to select the Edge
frequency.
L
When the operating frequency moves outside
the upper or lower edge frequency, “<<” or “>>”
is displayed in the upper side corners of the
SPECTRUM SCOPE screen.
<<: The frequency is outside the lower edge.
>>: The frequency is outside the higher edge.
When the frequency goes further away, “Scope Out
of Range” is displayed.
–2.5 kHz +2.5 kHz Center mode
145.800 MHz
146.000 MHz Fixed mode
D
Touch screen operation
When you touch the FFT scope zone or the waterfall
zone in the SPECTRUM SCOPE screen, the area
will be zoomed in. Then you touch the signal in the
zoomed area, you can directly tune your frequency to
the signal in the SPECTRUM SCOPE screen.
L
Holding down
XFC
changes the transmit frequency.
1. Display the SPECTRUM SCOPE screen.
MENU
»
SCOPE
2. Touch the Scope screen.
•The area around the touched point is zoomed in.
3. Touch the signal in the zoomed area.
Information
L
• In the Center mode, the operating frequency
changes to the touched point, and the point moves to
the screen center.
• In the Fixed mode, the operating frequency and
marker change to the touched point.
• Touch out of the zoomed area to close the zoomed
window.
D
Mini scope screen
The Mini scope screen can be simultaneously displayed
with another function displays, such as the RTTY
DECODE screen and the AUDIO SCOPE screen.
L
The Mini scope screen cannot be used when the Dualwatch
function is ON.
Push
M.SCOPE
to turn the Mini scope screen ON or OFF.
L
Hold down
M.SCOPE
for 1 second to display the
SPECTRUM SCOPE screen.
Mini scope screen with the AUDIO SCOPE screen