background image

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

I

ABOUT THE LICENSES

Information on the open source software 

being used by this product.
COPYRIGHT NOTICE, DISCLAIMER, and 

LICENSE:
If you modify libpng you may insert additional 

notices immediately following this sentence.
This code is released under the libpng 

license.
libpng versions 1.2.6, August 15, 2004, 

through 1.6.12, June 12, 2014, are Copyright 

(c) 2004, 2006-2014 Glenn Randers-

Pehrson, and are distributed according to the 

same disclaimer and license as libpng-1.2.5 

with the following individual added to the list 

of Contributing Authors:
   Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 

1.2.5, October 3, 2002, are Copyright (c) 

2000-2002 Glenn Randers-Pehrson, and are 

distributed according to the same disclaimer 

and license as libpng-1.0.6 with the following 

individuals added to the list of Contributing 

Authors:
   Simon-Pierre Cadieux

   Eric S. Raymond

   Gilles Vollant
and with the following additions to the 

disclaimer:
    There is no warranty against interference 

with your enjoyment of the library or 

against infringement. There is no warranty 

that our efforts or the library will fulfill any 

of your particular purposes or needs. 

This library is provided with all faults, 

and the entire risk of satisfactory quality, 

performance, accuracy, and effort is with 

the user.

libpng versions 0.97, January 1998, through 

1.0.6, March 20, 2000, are Copyright (c) 

1998, 1999, 2000 Glenn Randers-Pehrson, 

and are distributed according to the same 

disclaimer and license as libpng-0.96, with 

the following individuals added to the list of 

Contributing Authors:
   Tom Lane

   Glenn Randers-Pehrson

   Willem van Schaik
libpng versions 0.89, June 1996, through 

0.96, May 1997, are Copyright (c) 1996, 

1997 Andreas Dilger Distributed according 

to the same disclaimer and license as 

libpng-0.88, with the following individuals 

added to the list of Contributing Authors:
   John Bowler

   Kevin Bracey

   Sam Bushell

   Magnus Holmgren

   Greg Roelofs

   Tom Tanner
libpng versions 0.5, May 1995, through 0.88, 

January 1996, are Copyright (c) 1995, 1996 

Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and 

license, "Contributing Authors" is defined as 

the following set of individuals:
   Andreas Dilger

   Dave Martindale

   Guy Eric Schalnat

   Paul Schmidt

   Tim Wegner
The PNG Reference Library is supplied "AS 

IS". The Contributing Authors and Group 

42, Inc. disclaim all warranties, expressed 

or implied, including, without limitation, 

the warranties of merchantability and of 

fitness for any purpose. The Contributing 

Authors and Group 42, Inc. assume no 

liability for direct, indirect, incidental, special, 

exemplary, or consequential damages, 

which may result from the use of the PNG 

Reference Library, even if advised of the 

possibility of such damage.

Permission is hereby granted to use, copy, 

modify, and distribute this source code, or 

portions hereof, for any purpose, without fee, 

subject to the following restrictions:
  1.   The origin of this source code must not 

be misrepresented.

  2.  Altered versions must be plainly marked 

as such and must not be misrepresented 

as being the original source.

  3.  This Copyright notice may not be 

removed or altered from any source or 

altered source distribution.

The Contributing Authors and Group 42, 

Inc. specifically permit, without fee, and 

encourage the use of this source code as a 

component to supporting the PNG file format 

in commercial products. If you use this 

source code in a product, acknowledgment 

is not required but would be appreciated.
A "png_get_copyright" function is available, 

for convenient use in "about" boxes and the 

like:
    printf("%s", png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of 

course) is supplied in the files "pngbar.png" 

and "pngbar.jpg (88x31) and "pngnow.png" 

(98x31).
Libpng is OSI Certified Open Source 

Software. OSI Certified is a certification mark 

of the Open Source Initiative.
The contributing authors would like to thank 

all those who helped with testing, bug fixes, 

and patience. This wouldn't have been 

possible without all of you.
Thanks to Frank J. T. Wojcik for helping with 

the documentation.

License for CMSIS-RTOS RTX 

Implementation
Copyright (c) 1999-2009 KEIL, 2009-2013 

ARM Germany GmbH All rights reserved.
Redistribution and use in source and 

binary forms, with or without modification, 

are permitted provided that the following 

conditions are met:

 -   Redistributions of source code must retain 

the above copyright notice, this list of 

conditions and the following disclaimer.

 -  Redistributions in binary form must 

reproduce the above copyright

    notice, this list of conditions and the 

following disclaimer in the documentation 

and/or other materials provided with the 

distribution.

 -  Neither the name of ARM  nor the names 

of its contributors may be used

    to endorse or promote products derived 

from this software without specific prior 

written permission.

THIS SOFTWARE IS PROVIDED BY 

THE COPYRIGHT HOLDERS AND 

CONTRIBUTORS "AS IS" AND ANY 

EXPRESS OR IMPLIED WARRANTIES, 

INCLUDING, BUT NOT LIMITED TO, 

THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE 

ARE DISCLAIMED. IN NO EVENT 

SHALL COPYRIGHT HOLDERS 

AND CONTRIBUTORS BE LIABLE 

FOR ANY DIRECT, INDIRECT, 

INCIDENTAL, SPECIAL, EXEMPLARY, 

OR CONSEQUENTIAL DAMAGES 

(INCLUDING, BUT NOT LIMITED TO, 

PROCUREMENT OF SUBSTITUTE GOODS 

OR SERVICES; LOSS OF USE, DATA, OR 

PROFITS; OR BUSINESS INTERRUPTION) 

HOWEVER CAUSED AND ON ANY 

THEORY OF LIABILITY, WHETHER IN 

CONTRACT, STRICT LIABILITY, OR 

TORT (INCLUDING NEGLIGENCE OR 

OTHERWISE) ARISING IN ANY WAY OUT 

OF THE USE OF THIS SOFTWARE, EVEN 

IF ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGE.

ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.8 is a general purpose data 

compression library. All the code is thread 

safe. The data format used by the zlib 

library is described by RFCs (Request for 

Comments) 1950 to 1952 in the files http://

tools.ietf.org/html/rfc1950 (zlib format), 

rfc1951 (deflate format) and rfc1952 (gzip 

format).
All functions of the compression library are 

documented in the file zlib.h (volunteer to 

write man pages welcome, contact zlib@

gzip.org). A usage example of the library is 

given in the file test/example.c which also 

tests that the library is working correctly. 

Another example is given in the file test/

minigzip.c. The compression library itself 

is composed of all source files in the root 

directory.
To compile all files and run the test program, 

follow the instructions given at the top of 

Makefile.in. In short "./configure; make test", 

and if that goes well, "make install" should 

work for most flavors of Unix. For Windows, 

use one of the special makefiles in win32/ or 

contrib/vstudio/ . For VMS, use make_vms.

com.
Questions about zlib should be sent to 

<[email protected]>, or to Gilles Vollant <info@

winimage.com> for the Windows DLL 

version. The zlib home page is http://zlib.

net/ . Before reporting a problem, please 

check this site to verify that you have the 

latest version of zlib; otherwise get the latest 

version and check whether the problem still 

exists or not.
PLEASE read the zlib FAQ http://zlib.net/

zlib_faq.html before asking for help.
Mark Nelson <[email protected]> wrote an 

article about zlib for the Jan. 1997 issue of 

Dr. Dobb's Journal; a copy of the article is 

available at http://marknelson.us/1997/01/01/

zlib-engine/ .
The changes made in version 1.2.8 are 

documented in the file ChangeLog.
Unsupported third party contributions are 

provided in directory contrib/ .
zlib is available in Java using the java.util.zip 

package, documented at http://java.sun.com/

developer/technicalArticles/Programming/

compression/ .
A Perl interface to zlib written by Paul 

Marquess <[email protected]> is available 

at CPAN (Comprehensive Perl Archive 

Network) sites, including http://search.cpan.

org/~pmqs/IO-Compress-Zlib/ .
A Python interface to zlib written by A.M. 

Kuchling <[email protected]> is available in 

Python 1.5 and later versions, see http://

docs.python.org/library/zlib.html .
zlib is built into tcl: http://wiki.tcl.tk/4610 .
An experimental package to read and write 

files in .zip format, written on top of zlib by 

Gilles Vollant <[email protected]>, is 

available in the contrib/minizip directory of 

zlib.
Notes for some targets:
-  For Windows DLL versions, please see 

win32/DLL_FAQ.txt

-  For 64-bit Irix, deflate.c must be compiled 

without any optimization. With

-  O, one libpng test fails. The test works in 

32 bit mode (with the -n32 compiler flag). 

The compiler bug has been reported to 

SGI.

-  zlib doesn't work with gcc 2.6.3 on a DEC 

3000/300LX under OSF/1 2.1 it works 

when compiled with cc.

-  On Digital Unix 4.0D (formely OSF/1) 

on AlphaServer, the cc option -std1 is 

necessary to get gzprintf working correctly. 

This is done by configure.

-  zlib doesn't work on HP-UX 9.05 with some 

versions of /bin/cc. It works with other 

compilers. Use "make test" to check your 

compiler.

-  gzdopen is not supported on RISCOS or 

BEOS.

-  For PalmOs, see http://palmzlib.

sourceforge.net/

Acknowledgments:
The deflate format used by zlib was 

defined by Phil Katz. The deflate and zlib 

specifications were written by L. Peter 

Deutsch. Thanks to all the people who 

reported problems and suggested various 

improvements in zlib; they are too numerous 

to cite here.

Copyright notice:
(C)  1995-2013 Jean-loup Gailly and Mark 

Adler

This software is provided 'as-is', without any 

express or implied warranty. In no event will 

the authors be held liable for any damages 

arising from the use of this software.
Permission is granted to anyone to use 

this software for any purpose, including 

commercial applications, and to alter it and 

redistribute it freely, subject to the following 

restrictions:
1.  The origin of this software must not be 

misrepresented; you must not claim 

that you wrote the original software. 

If you use this software in a product, 

an acknowledgment in the product 

documentation would be appreciated but 

is not required.

2.  Altered source versions must be plainly 

marked as such, and must not be 

misrepresented as being the original 

software.

3.  This notice may not be removed or altered 

from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]
If you use the zlib library in a product, we 

would appreciate *not* receiving lengthy 

legal documents to sign. The sources are 

provided for free but without warranty of any 

kind. The library has been entirely written by 

Jean-loup Gailly and Mark Adler; it does not 

include third-party code.
If you redistribute modified sources, we 

would appreciate that you include in the file 

ChangeLog history information documenting 

your changes. Please read the FAQ for more 

information on the distribution of modified 

source versions.

Summary of Contents for IC-9700

































































































Reviews: