6
SD CARD
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
6-2
Unmounting
Saving the setting data
1. Open the SD CARD screen.
MENU
» SET >
SD Card
2.
Touch “Unmount.”
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it, as shown below.
Otherwise the data may be corrupted or deleted.
The Memory channels and the transceiver’s settings
can be saved onto an SD card.
3.
Touch [YES] to unmount.
•After unmounting, returns to the SD CARD screen.
L
To cancel unmounting, touch [NO].
4.
Remove the card from the transceiver.
L
Push in the SD card until a click sounds to unlock the
card, and then pull it out.
5. To close the SD CARD screen, push
EXIT
several
times.
When the transceiver is OFF
You can remove the SD card starting from step 4 of
the steps described above.
q
Push in
w
Pull out
1. Open the SAVE SETTING screen.
MENU
» SET > SD Card >
Save Setting
2.
Touch “<<New File>>.”
L
The file name is automatically set in the following
format: Setyyyymmdd_xx (yyyy: Year, mm: month,
dd: day, xx: serial number).
3.
To save the file with the displayed name, touch
[ENT].
L
If you want to change the name, delete the name and
reenter it, and then touch [ENT].
4.
Touch [YES].
•Saves the data settings.
5. To close the SD CARD screen, push
EXIT
several
times.
