![background image](http://html2.mh-extra.com/html/icom/ic-9700/ic-9700_basic-manual_3441862057.webp)
8
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-2
Tone Control/TBW
MENU
» SET > Tone Control/TBW >
RX
SSB, AM, FM, DV, CW, RTTY
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter and low-pass filter, in 100 Hz steps.
L
If this item is set, the “RX Bass” and “RX Treble” items are
automatically set to “0.”
SSB, AM, FM, DV
RX Bass
(Default: 0)
RX Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
MENU
» SET > Tone Control/TBW >
TX
SSB, AM, FM, DV
TX Bass
(Default: 0)
TX Treble
(Default: 0)
Sets the bass or treble level of the transmit audio.
SSB
TBW (WIDE)
(Default: 100 – 2900)
TBW (MID)
(Default: 300 – 2700)
TBW (NAR)
(Default: 500 – 2500)
Sets the transmission passband width to wide, mid,
or narrow, by changing the lower and higher cut-off
frequencies.
SSB-D
TBW
(Default: 300 – 2700)
Sets the transmission passband width by changing
the lower and upper cut-off frequencies.
Function
MENU
» SET >
Function
Beep Level
(Default: 50%)
Sets the beep output level.
L
If the “Beep (Confirmation)” item is set to “OFF,” no beeps
sound.
Beep Level Limit
(Default: ON)
Selects whether or not to limit the volume up to the
specified level.
•OFF: Does not limit the volume level.
•ON: Limits the volume level.
Beep (Confirmation)
(Default: ON)
Turns the Confirmation beep ON or OFF.
•OFF: Turns the function OFF for silent operation.
•ON: A beep sounds when a switch is pushed or
the touch panel is touched.
L
If the “Beep Level” item is set to “0%,” no beep sounds.
Band Edge Beep
(Default: ON (Default))
Selects an option for the Band Edge Beep function.
•OFF:
Turns OFF the function.
•ON (Default): A beep sounds when you tune outside
of, or back into the default amateur
band’s frequency range.
•ON (User): A beep sounds when you tune outside
of, or back into a user programmed
amateur band’s frequency range.
•
ON (User) & TX Limit:
A beep sounds when you tune outside
of, or back into a user programmed
amateur band’s frequency range.
Transmitting is inhibited outside of the
range.
L
If the “Beep Level” item is set to “0%,” no beep sounds
.
Beep Sound (MAIN)
(Default: 1000Hz)
Beep Sound (SUB)
(Default: 1000Hz)
Sets the audio frequency for beeps.
L
If the “Beep Level” item is set to “0%,” no beep sounds.
MENU
» SET > Function >
Sub Band Mute (TX)
Speaker/Phones
(Default: OFF)
USB
(Default: OFF)
LAN
(Default: OFF)
Selects whether or not to mute the received audio of
the SUB band when you transmit.
•OFF: Does not mute the received audio of the SUB
band.
•ON: Mutes the received audio of the SUB band.