Icidu NI-707549 Manual Download

Page: 48 / 106

NI-7075349

Wireless Router 300N

- 42 -

Figure 4-27 DHCP Settings

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer

manually.

Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.1.100 is the default start address.

End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.1.199 is the default end address.

Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the

amount of time in minutes and the user will be "leased" this dynamic IP Address. After the

time is up, the user will be automatically assigned a new dynamic IP address. The range of

the time is 1 ~ 2880 minutes. The default value is 120 minutes.

Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the

Router. The default value is 192.168.1.1.

Default Domain - (Optional.) Input the domain name of your network.

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP or consult your

ISP.

Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP

provides two DNS servers.

Note:

To use the DHCP server function of the Router, you must configure all computers on the LAN as

"Obtain an IP Address automatically".

4.7.2 DHCP Client List

Choose menu “DHCP

→

DHCP Client List”, you can view the information about the clients

Summary of Contents for NI-707549











































































































Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands

Icidu NI-707549, Manual

Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands