Icidu NI-707549 Page 87 Manual Download

Page: 87 / 106

NI-7075349

Wireless Router 300N

- 81 -

Figure 4-79 Diagnostic Results

Note:

Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping
Timeout” are used for Ping function. Option “Tracert Hops” are used for Tracert function.

4.16.3 Firmware Upgrade

Choose menu “System Tools

→

Firmware Upgrade”, you can update the latest version of

firmware for the Router on the following screen.

Figure 4-80 Firmware Upgrade

Firmware Version - This displays the current firmware version.

Hardware Version - This displays the current hardware version. The hardware version of the

upgrade file must accord with the Router’s current hardware version.

To upgrade the Router's firmware, follow these instructions below:

1. Download a more recent firmware upgrade file from our website.

2. Type the path and file name of the update file into the File field. Or click the Browse button to

locate the update file.

3. Click the Upgrade button.

Note:

1) New firmware versions are posted at and can be downloaded for free. There is no need to

upgrade the firmware unless the new firmware has a new feature you want to use. However,

when experiencing problems caused by the Router rather than the configuration, you can try to

upgrade the firmware.

2) When you upgrade the Router's firmware, you may lose its current configurations, so before

Summary of Contents for NI-707549











































































































Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands

Icidu NI-707549, Manual

Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands