Icidu NI-707549 Page 89 Manual Download

Page: 89 / 106

NI-7075349

Wireless Router 300N

- 83 -

To upgrade the Router's configuration, follow these instructions.

•

Click the Browse… button to locate the update file for the Router, or enter the exact path

to the Setting file in the text box.

•

Click the Restore button.

Note:

The current configuration will be covered by the uploading configuration file. The upgrade process

lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the

upgrading process to prevent any damage.

4.16.6 Reboot

Choose menu “System Tools

→

Reboot”, you can click the Reboot button to reboot the Router

via the next screen.

Figure 4-83 Reboot the Router

Some settings of the Router will take effect only after rebooting, which include

•

Change the LAN IP Address (system will reboot automatically).

•

Change the DHCP Settings.

•

Change the Wireless configurations.

•

Change the Web Management Port.

•

Upgrade the firmware of the Router (system will reboot automatically).

•

Restore the Router's settings to factory defaults (system will reboot automatically).

•

Update the configuration with the file (system will reboot automatically.

4.16.7 Password

Choose menu “System Tools

→

Password”, you can change the factory default user name and

password of the Router in the next screen as shown in Figure 4-84.

Summary of Contents for NI-707549











































































































Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands

Icidu NI-707549, Manual

Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands